PTFE Stirrer Shafts |
|
Guaranteed chemically resistant, inert and leak-free Use up to 280oC (540 oF) Encapsulated stainless steel core for maximum rigidity Now available in 8 and 10 mm diameter shaft |
|
|
||||||
Reference
005.230.2
|
Shaft D. (mm) 6.0 |
Length
300 |
Rotor D. (mm)
40 |
Reference
005.330.2 |
Shaft D. (mm) 6.0 |
Length
300 |
Rotor D. (mm) 80 |
EX
= Exposed Shaft.
Shafts of 650mm, 750mm & 1000mm in length are produced with a stainless
steel core with an exposed end for more rigid clamping to the chuck
drive. Shafts up to 12mm diameter have an exposed end of 50mm long and
6.5mm diameter. Shafts of 16mm diameter have an exposed end of 50mm
long and 8.5mm diameter. If the size you require is not listed please contact us for a quote - it will cost less than you think. |
|
|||||
Plain Shafts for Blades |
Blades for Plain Shafts |
||||
Reference
005.530.1
|
Shaft D.
6.0 |
Length
300 |
Reference Square End
002.052.1 Plain End
002.1065.1 |
Width
52
65 |
Height
14
25 |
EX
= Exposed Shaft.
Shafts of 650mm, 750mm & 1000mm in length are produced with a stainless
steel core with an exposed end for more rigid clamping to the chuck
drive. Shafts up to 12mm diameter have an exposed end of 50mm long and
6.5mm diameter. Shafts of 16mm diameter have an exposed end of 50mm
long and 8.5mm diameter. If the size you require is not listed please contact us for a quote - it will cost less than you think. |
|
|||||||
Reference
005.430.2 |
Shaft D. (mm) 6.0 |
Length
300 |
Rotor D. (mm)
40 |
||||
EX
= Exposed Shaft.
Shafts of 650mm, 750mm & 1000mm in length are produced with a stainless
steel core with an exposed end for more rigid clamping to the chuck
drive. Shafts up to 12mm diameter have an exposed end of 50mm long and
6.5mm diameter. Shafts of 16mm diameter have an exposed end of 50mm
long and 8.5mm diameter. If the size you require is not listed please contact us for a quote - it will cost less than you think. |